Jumpstart is an effective way if your car battery is dead or you are stranded on the road. But without proper guidance, the jumpstart leads can damage the battery. In this article, we will guide you in detail on how to jumpstart a car.

Why Do You Need To Jumpstart Car

A flat battery is one of the common reasons. But some of the reasons requiring roadside assistance are as follows.

• Cold Weather
• Faulty/old battery
• Leaving the headlights on for sometime.
• Faulty Alternator or motor

What Do You Need Before Jumpstarting A Car?

Before jumpstarting a vehicle, make sure you have the right equipment with you that is

• A good pair of jumpstart leads.
• Gloves for safety.
• A working car with a charged battery.
• Jump starter

Safety Tips When Jumpstarting A Car

Before performing the jumpstart procedure, keep these guidelines in mind for your safety and the safety of the people and the vehicle around you.

Check battery and Jump leads

• Don’t jumpstart a vehicle if the battery is leaking.
• If the leads get hot, stop using them immediately.
• Don’t use damaged jump leads.

Environment Safety

• Avoid smoking and open flames near the battery.
• Avoid using metal objects near the battery, as this can cause it to explode.
• If the car does not start after some time, the battery may need to be replaced.
• Don’t remove leads while the engine is running, as it can cause severe damage to the vehicle.

What are Jump leads?

Car battery Jump leads are insulated cables with metal clamps at both ends. These are heavy-duty cables used to connect the jump starter to the battery for charging. These cables allow the dead battery to gain enough power to start the engine.

Each set of jump leads includes.

1. Red cable for the positive terminal +
2. Black cable for the negative terminal –

These are essential parts of any jump starter.

What if Jumpstarting Does Not Work?

If the car does not start after jumpstarting, there may be several reasons, such as an alternator or motor issue, a faulty battery, or damaged wiring.

How to Car Jumpstart with a Booster Pack

A car battery booster pack is a good option to keep in your car. It will help them if they are stranded on the road.

Steps to Use a Car Battery Booster Pack.

Check Battery Booster Pack

• Make sure the car battery booster pack is fully charged.
• Always place the pack in a stable location other than the engine.

Connect the Jump leads

• Connect the red lead terminal to the positive terminal of the battery.
• Connect the black terminal of the lead to the negative terminal of the battery.

Turn on the Pack

  Once connected, the terminal then starts the booster pack.

Try To Start the Car

 Try to start the car after connecting the booster to the pack. It should start after a few tries. If not, there may be another reason that needs professional help.

Running the engine

If the car starts after jumpstarting, let the engine run for at least 5 minutes to give the battery enough time to recharge.

Turn off the engine and disconnect the jump starter

After the engine has enough power, please turn it off and remove the jumper leads, starting with the black one, then the red one.

Restart The  Car

Start the car after removing the jump starter pack. If it starts, then it is good to go.

How Often You Should Change your Car battery

Average batteries should last up to 4-5 years. But if the battery shows signs of deterioration or is leaking, change it immediately. If you are struggling to start the car, it may be a sign of a faulty battery that needs to be replaced.

FAQS

Final Thoughts:

Now that you know how to jumpstart a car safely, you will be prepared in case of an emergency. Make sure to follow the procedure accurately and don’t hesitate to call a professional service like AM2PM Recovery.